|
|
 |
 |  Apr 6th, 07, 05:41 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| yamaha warrior- over revs
I have a yamaha warrior that when i start it the engine way over revs and has some wite smoke , it just started doing this and ive been riding it frequently. I think my float is stuck but im not sure. | | |  | Apr 6th, 07, 07:12 PM | | Mudpuddlin' Darlin' STAFF Join Date: Mar 2006 Location: AR
Posts: 5,588
| What year is it? You might need to clean out the main jet | | | | Apr 6th, 07, 09:32 PM | | Super Moderator STAFF Join Date: Mar 2006 Location: Florida
Posts: 1,776
| Try and clean the carb out real good.Could have some biuldup in the slow circuit abd is stopping fuel from flowing into your pilot jet.Also pull the main jet out and the brass tube that you main jet screws into will slide out through the top of the carb.Pull it out and make sure all the holes in the side of it are clean.
Most of the time if the float is stuck it will cause it to run real rich and blow black smoke out and they wont rev up.Usually when they rev up like that it is caused by a lean mixture on the slow circuit somewhere. | | | | Apr 6th, 07, 10:03 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| its a 1988 warrior , when i clean the carb should i soak it in cab cleaner | | | | Apr 6th, 07, 10:10 PM | | Super Moderator STAFF Join Date: Mar 2006 Location: Florida
Posts: 1,776
| Yes soak it in carb cleaner and if you have one,take an air compressor and use a blow nozzle to blow through every hole you see in the carb.There may be a piece of trash stuck somewhere that the carb cleaner get out. | | | | Apr 7th, 07, 03:45 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| `well I cleaned the carb out but could not get the bowl at the bottom off so i tried my best to get it clean, once i put the carb back on it woudnt start. so im not sure what to do now | | | | Apr 9th, 07, 01:40 PM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| you really need to take the bottom off to clean the jets. did you try pryin it off with a flat head | | | | Apr 9th, 07, 02:46 PM | | Super Moderator STAFF Join Date: Mar 2006 Location: Florida
Posts: 1,776
| Sounds like you got some more trash in the bowl.If you cant get the screws out,use a pair of diagnols to grab the screw heads with.Most of the time that will hold them enough to loosen them | | | | Apr 10th, 07, 09:08 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| well i did get the bottom off but it turns out that its not getting any spark and the coil is good i got it teast and it gives a negative reading when you test after the coil. I think it could be the magnito so im going to open it up and check it out. | | | | Apr 11th, 07, 08:52 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| well it happened to be the cdi box (i think) but im having a hard time finding a cheap one for a an 88 warrior | | | | Apr 11th, 07, 08:59 PM | | Senior Member Join Date: Feb 2007 Location: New Jersey
Posts: 973
| bah...just buy a new quad....thats always teh solution | | | | Apr 11th, 07, 09:08 PM | | Junior Member Join Date: Aug 2006
Posts: 29
| i'd love to if i had the money | | | | Apr 11th, 07, 09:18 PM | | Senior Member Join Date: Feb 2007 Location: New Jersey
Posts: 973
| just pull it out of your arse like I did | | | |
|
vBulletin; Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
|
