 |
 |  Nov 6th, 07, 12:19 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| big bear axle bearing
what's the easiest way the replace the right side axle bearing for a big bear 400 2001 model  i've got the hub and drum brake houseing off, i can see the bad chewed up bearing , just can't get the bearing to pull out i really don't what to pull the whole axle out, but if that's the only way i will. | | |  | Nov 6th, 07, 08:21 AM | | Super Moderator STAFF Join Date: Jul 2007 Location: Crossville,TN
Posts: 1,821
| If i was you I would replace the bearings with the All Balls Brand. they are cheaper and better than the OEM's. | | | | Nov 7th, 07, 01:35 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| Quote:
Originally Posted by Bluerider660  If i was you I would replace the bearings with the All Balls Brand. they are cheaper and better than the OEM's. who's got a good price on them- what do i need to do it- as far as tools. | | | | Nov 7th, 07, 03:33 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| ????? do i need wheel bearings or diff bearing kit ????  | | | | Nov 8th, 07, 01:34 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| does any body know how to get the axle to come out | | | | Nov 8th, 07, 08:48 AM | | Super Moderator STAFF Join Date: Jul 2007 Location: Crossville,TN
Posts: 1,821
| Rocky mountian ATV sells them. Here is a link to their site. Rocky Mountain ATV/MC | | | | Nov 9th, 07, 01:18 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| thanks, i just ordered them, now i just have to find time to install them. | | | | Nov 12th, 07, 08:35 AM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| o.k. need some help tried to get the bearing out of the axle tube and the inner race came out with the balls and cage, how can i get the outer race out? | | | | Nov 30th, 07, 03:56 PM | | Junior Member Join Date: Nov 2007
Posts: 1
| Icut mine out with a die grinder with an almost worn out wheel. Careful don't cut the tube! | | | | Dec 2nd, 07, 07:59 PM | | Super Moderator STAFF Join Date: Aug 2006 Location: moulton,alabama
Posts: 4,243
| i guess i should have posted i got them out with a slide hammer, it was very easy. | | | |
|
vBulletin; Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
|
